条形平板中裂纹识别的遗传算法

研究条形平板中平行于上下边界的单一裂纹的识别问题。给出了当一声波入射这一条形平板时，裂纹参数与反射、透射系数之间的关系式，并应用遗传算法对裂纹进行了定量识别。计算结果表明本文给出的方法具有较好的识别精度。     

纳米压痕过程的三维有限元数值试验研究

采用有限元方法模拟了纳米压痕仪的加、卸载过程，三维有限元模型考虑了纳米压痕仪的标准Berkovich压头．介绍了有限元模型的几何参数、边界条件、材料特性与加载方式，讨论了摩擦、滑动机制、试件模型的大小对计算结果的影响，进行了计算结果与标准试样实验结果的比较，证实了模拟的可靠性．在此基础上，重点研究了压头尖端曲率半径对纳米压痕实验数据的影响．对比分析了尖端曲率半径r＝0与r＝100nm两种压头的材料压痕载荷—位移曲线．结果表明，当压头尖端曲率半径r≠0时，基于经典的均匀连续介质力学本构理论、传统的实验手段与数据处理方法，压痕硬度值会随着压痕深度的减小而升高．     

平面八节点四边形理性元

推导平面八节点四边形理性有限元列式，采用具有直到四次多项式的平面问题的微分方程的解作为插值函数，算例结果表明平面八节点四边形理性有限元的有效性。     

粉喷桩单桩承载力确定方法的比较

粉喷桩在高速公路软土地基处理中得到了广泛的应用,但其承载力的合理确定是工程实际中关心的一个重要问题。通过对工程中常用的几种粉喷桩单桩承载力确定方法的比较,分析了各自存在的问题和适用条件,提出了在实际工程应用中确定水泥搅拌桩单桩承载力的选用建议。     

Diffuse mode bifurcation of soil causing convection-like shear investigated by group-theoretic image analysis

Diffuse mode bifurcation of soil under plane-strain compression test is shown, by means of an image analysis based on group-theoretic bifurcation theory, to trigger convection-like shear and to precede shear band formation. First digital photos of Toyoura sand specimens are processed by PIV (particle image velocimetry) to gather digitized images of deformation. Next bifurcation from a uniform state is detected by expanding these images into the double Fourier series and finding a predominant harmonic diffuse bifurcation mode based on that theory. This harmonic bifurcation mode, which is the mixture of a few harmonic functions, expresses complex convection-like shear. Last bifurcation from a non-uniform state is detected by decomposing each image into a few images with different symmetries to extract non-harmonic diffuse bifurcation modes. Diffuse modes of bifurcation, which hitherto were hidden behind predominant uniform compressive deformation, have thus been made transparent by virtue of the group-theoretic image analysis proposed. A possible course of deformation suggested herein is the evolution of diffuse mode bifurcation with a convection-like bifurcation mode breaking uniformity and symmetry, followed by the formation of shear bands through localization.     

基于界面端奇异性理论的单纤维拔出试验的试件设计

在单纤维拔出试验中，由于试件的界面端存在应力奇异性，这使试验所得到的界面剪切强度数据失去合理性[1]。但从文献[1]关于微珠脱粘试验研究的结论中可以发现当基体的楔形角小于某临界角度后，微珠试件界面端应力奇异性几乎消失。由此启发我们设计出一种楔形角小于该纤维／基体系统临界角的锥面的拔出试件，这样即可以防止出现传统拔出试件在界面端的强应力奇异性，又可以避免微珠脱粘试验自身的缺陷。界面端具有任意楔形角的轴对称模型被用于分析和确定纤维／基体系统的临界角，对方程进行渐近展开和分离变量处理，根据边界条件可以得到关于特征值λ的特征方程，针对确定的纤维／基体系统可以得到特征值和楔形角的关系曲线，我们把应力奇异性指数等于-0．005时所对应的楔形角定义为临界角，以及根据临界角设计锥面拔出试件的方法。     

从自由试验提取约束结构模态

已有的“从自由试验提取约束结构模态”的动柔度法，仅适用于刚性支承情况．在工程中，弹性支承状态是常见的，为此，建立了这一情况下的提取方法．该方法具有普遍性，因为当支承刚度很大时，可得到刚性支承下的结果；当支承刚度很小时，便可获得工程中用橡皮绳悬吊结构后所测得的自由-自由试验模态．总之，当支承刚度为任何值时，用此方法都能提取到相应约束结构的满意试验模态参数．表明该算法是非常稳定的，对于工程应用至关重要．     

Fluid Dynamics at Connections in Paediatric Cardiac Surgery*

The modified Blalock-Taussig shunt is a connection created between the systemic and pulmonary arterial circulations to improve pulmonary perfusion in children with congenital heart diseases. Survival of these patients is critically dependent on blood flow distribution between the pulmonary and systemic circulations, that in turn depends upon the fluid dynamic behaviour of the shunt. Computational fluid dynamics, structural analyses as well as in vitro experiments were carried out to derive a quantitative relationship between the shunt flow and the corresponding pressure drop. While computational fluid dynamics simulations were based on the assumption of rigid wall for the shunt and the arteries, proper distensible conduits were used in the in vitro study and the structural analysis of the anastomosis deformation. The results indicated that the internal pressure combined with wall distensibility modifies the cross-sectional area of the distal anastomosis (between the shunt and the pulmonary artery). This fact affects the pressure drop across the shunt, especially at low pressures. Based on the results from the computational analyses and the in vitro experiments, a relationship between pressure drop and flow in the shunt was obtained, which matches data from clinical measurements.     

Evaluating the accuracy of ESR dose determination of pseudo-Early Pleistocene fossil tooth enamel samples using dose recovery tests

In ESR dating of Early Pleistocene fossil tooth enamel samples, the fitting function used for the evaluation of the D_E value is undoubtedly among the major sources of uncertainty. Dose recovery tests performed on fossil tooth enamel showing D_E values >1,000 Gy demonstrate: (i) that high precision ESR measurements (<0.5%) and high D_E reproducibility (<5%) may be achieved; (ii) the appropriateness of the Double Saturating Exponential (DSE) fitting function for ESR dose reconstruction. In contrast, the SSE function, which has been almost exclusively used so far, does simply not correctly describe the behavior of the radiation induced ESR signal of tooth enamel with the dose.Several fitting functions and data weighting options were tested and the combination of a DSE with data weighted by the inverse of the squared intensities is the procedure providing the most accurate D_E results. However, the SSE may nevertheless sometimes produce consistent results if D_max does not exceed 6*D_E. Further work is required in that direction in order to determine more precisely in which conditions the SSE could be used as a fair approximation of the DSE function for these samples.     

Painlevé analysis and exact solutions of the Korteweg–de Vries equation with a source

We consider the Korteweg–de Vries equation with a source. The source depends on the solution as polynomials with constant coefficients. Using the Painlevé test we show that the generalized Korteweg–de Vries equation is not integrable by the inverse scattering transform. However there are some exact solutions of the generalized Korteweg–de Vries equation for two forms of the source. We present these exact solutions.